saving rtsp stream

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

saving rtsp stream

Lars von Gehr
Hi users,
I’m trying to save a rtsp tv stream from my fritzbox 6490. Streaming in VLC player is no problem.
When I’m trying to save it following output is generated. The process is not stopping itself.

Xxx:~$ ffmpeg -i rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214 -t 30 -acodec copy -vcodec copy /volume1/video/test1.ts
[4] 20759
[5] 20760
[6] 20761
[7] 20762
[8] 20763
[9] 20764
-sh: -t: command not found
[5]   Done                    bw=8
[6]   Done                    msys=dvbc
[7]   Done                    mtype=256qam
[8]   Done                    sr=6900
[9]   Done                    specinv=0
Xxx:~$ ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
  built with gcc 4.9.4 (crosstool-NG crosstool-ng-1.22.0-169-g87eb166) 20150629 (prerelease)
  configuration: --prefix=/usr --incdir='${prefix}/include/ffmpeg' --arch=arm64 --target-os=linux --cross-prefix=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi- --enable-cross-compile --enable-optimizations --enable-pic --enable-gpl --enable-shared --disable-static --enable-version3 --enable-nonfree --enable-libfaac --enable-encoders --enable-pthreads --disable-bzlib --disable-protocol=rtp --disable-muxer=image2 --disable-muxer=image2pipe --disable-swscale-alpha --disable-ffserver --disable-ffplay --disable-devices --disable-bzlib --disable-altivec --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --disable-vaapi --disable-decoder=amrnb --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-encoder=zmbv --disable-encoder=dca --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-decoder=dca --disable-decoder=eac3 --disable-decoder=truehd --cc=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi-ccache-gcc
  libavutil      54. 27.100 / 54. 27.100
  libavcodec     56. 41.100 / 56. 41.100
  libavformat    56. 36.100 / 56. 36.100
  libavdevice    56.  4.100 / 56.  4.100
  libavfilter     5. 16.101 /  5. 16.101
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  2.100 /  1.  2.100
  libpostproc    53.  3.100 / 53.  3.100



After hitting any key the process stops with following command.


[4]+  Stopped(SIGTTOU)        ffmpeg -i rtsp://192.168.178.254:554/?freq=322

I tried to change all the options, but always the first option after the url is not found. I don’t have more ideas. Maybe anyone is more familiar with it.

Thanks in advance
Lars


_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

William McCall
Try putting the URL in quotes.

On Fri, Mar 2, 2018 at 3:33 PM, Lars von Gehr <[hidden email]> wrote:

> Hi users,
> I’m trying to save a rtsp tv stream from my fritzbox 6490. Streaming in VLC player is no problem.
> When I’m trying to save it following output is generated. The process is not stopping itself.
>
> Xxx:~$ ffmpeg -i rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214 -t 30 -acodec copy -vcodec copy /volume1/video/test1.ts
> [4] 20759
> [5] 20760
> [6] 20761
> [7] 20762
> [8] 20763
> [9] 20764
> -sh: -t: command not found
> [5]   Done                    bw=8
> [6]   Done                    msys=dvbc
> [7]   Done                    mtype=256qam
> [8]   Done                    sr=6900
> [9]   Done                    specinv=0
> Xxx:~$ ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
>   built with gcc 4.9.4 (crosstool-NG crosstool-ng-1.22.0-169-g87eb166) 20150629 (prerelease)
>   configuration: --prefix=/usr --incdir='${prefix}/include/ffmpeg' --arch=arm64 --target-os=linux --cross-prefix=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi- --enable-cross-compile --enable-optimizations --enable-pic --enable-gpl --enable-shared --disable-static --enable-version3 --enable-nonfree --enable-libfaac --enable-encoders --enable-pthreads --disable-bzlib --disable-protocol=rtp --disable-muxer=image2 --disable-muxer=image2pipe --disable-swscale-alpha --disable-ffserver --disable-ffplay --disable-devices --disable-bzlib --disable-altivec --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --disable-vaapi --disable-decoder=amrnb --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-encoder=zmbv --disable-encoder=dca --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-decoder=dca --disable-decoder=eac3 --disable-decoder=truehd --cc=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi-ccache-gcc
>   libavutil      54. 27.100 / 54. 27.100
>   libavcodec     56. 41.100 / 56. 41.100
>   libavformat    56. 36.100 / 56. 36.100
>   libavdevice    56.  4.100 / 56.  4.100
>   libavfilter     5. 16.101 /  5. 16.101
>   libswscale      3.  1.101 /  3.  1.101
>   libswresample   1.  2.100 /  1.  2.100
>   libpostproc    53.  3.100 / 53.  3.100
>
>
>
> After hitting any key the process stops with following command.
>
>
> [4]+  Stopped(SIGTTOU)        ffmpeg -i rtsp://192.168.178.254:554/?freq=322
>
> I tried to change all the options, but always the first option after the url is not found. I don’t have more ideas. Maybe anyone is more familiar with it.
>
> Thanks in advance
> Lars
>
>
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".



--
William McCall
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Lars von Gehr
Hi William,
thanks for your answer. Unfortunately it now fails with an unknown protocol. I’m thinking of errors in the url, but as I told it is working in vlc.

~$ ffmpeg -i "rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214" -t 30 -acodec copy -vcodec copy /volume1/video/test1.ts
ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
  built with gcc 4.9.4 (crosstool-NG crosstool-ng-1.22.0-169-g87eb166) 20150629 (prerelease)
  configuration: --prefix=/usr --incdir='${prefix}/include/ffmpeg' --arch=arm64 --target-os=linux --cross-prefix=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi- --enable-cross-compile --enable-optimizations --enable-pic --enable-gpl --enable-shared --disable-static --enable-version3 --enable-nonfree --enable-libfaac --enable-encoders --enable-pthreads --disable-bzlib --disable-protocol=rtp --disable-muxer=image2 --disable-muxer=image2pipe --disable-swscale-alpha --disable-ffserver --disable-ffplay --disable-devices --disable-bzlib --disable-altivec --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --disable-vaapi --disable-decoder=amrnb --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-encoder=zmbv --disable-encoder=dca --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-decoder=dca --disable-decoder=eac3 --disable-decoder=truehd --cc=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi-ccache-gcc
  libavutil      54. 27.100 / 54. 27.100
  libavcodec     56. 41.100 / 56. 41.100
  libavformat    56. 36.100 / 56. 36.100
  libavdevice    56.  4.100 / 56.  4.100
  libavfilter     5. 16.101 /  5. 16.101
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  2.100 /  1.  2.100
  libpostproc    53.  3.100 / 53.  3.100
rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214: Protocol not found

> Am 02.03.2018 um 16:57 schrieb William McCall <[hidden email]>:
>
> Try putting the URL in quotes.
>
> On Fri, Mar 2, 2018 at 3:33 PM, Lars von Gehr <[hidden email]> wrote:
>> Hi users,
>> I’m trying to save a rtsp tv stream from my fritzbox 6490. Streaming in VLC player is no problem.
>> When I’m trying to save it following output is generated. The process is not stopping itself.
>>
>> Xxx:~$ ffmpeg -i rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214 -t 30 -acodec copy -vcodec copy /volume1/video/test1.ts
>> [4] 20759
>> [5] 20760
>> [6] 20761
>> [7] 20762
>> [8] 20763
>> [9] 20764
>> -sh: -t: command not found
>> [5]   Done                    bw=8
>> [6]   Done                    msys=dvbc
>> [7]   Done                    mtype=256qam
>> [8]   Done                    sr=6900
>> [9]   Done                    specinv=0
>> Xxx:~$ ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
>>  built with gcc 4.9.4 (crosstool-NG crosstool-ng-1.22.0-169-g87eb166) 20150629 (prerelease)
>>  configuration: --prefix=/usr --incdir='${prefix}/include/ffmpeg' --arch=arm64 --target-os=linux --cross-prefix=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi- --enable-cross-compile --enable-optimizations --enable-pic --enable-gpl --enable-shared --disable-static --enable-version3 --enable-nonfree --enable-libfaac --enable-encoders --enable-pthreads --disable-bzlib --disable-protocol=rtp --disable-muxer=image2 --disable-muxer=image2pipe --disable-swscale-alpha --disable-ffserver --disable-ffplay --disable-devices --disable-bzlib --disable-altivec --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --disable-vaapi --disable-decoder=amrnb --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-encoder=zmbv --disable-encoder=dca --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-decoder=dca --disable-decoder=eac3 --disable-decoder=truehd --cc=/usr/local/aarch64-unknown-linux-gnueabi/bin/aarch64-unknown-linux-gnueabi-ccache-gcc
>>  libavutil      54. 27.100 / 54. 27.100
>>  libavcodec     56. 41.100 / 56. 41.100
>>  libavformat    56. 36.100 / 56. 36.100
>>  libavdevice    56.  4.100 / 56.  4.100
>>  libavfilter     5. 16.101 /  5. 16.101
>>  libswscale      3.  1.101 /  3.  1.101
>>  libswresample   1.  2.100 /  1.  2.100
>>  libpostproc    53.  3.100 / 53.  3.100
>>
>>
>>
>> After hitting any key the process stops with following command.
>>
>>
>> [4]+  Stopped(SIGTTOU)        ffmpeg -i rtsp://192.168.178.254:554/?freq=322
>>
>> I tried to change all the options, but always the first option after the url is not found. I don’t have more ideas. Maybe anyone is more familiar with it.
>>
>> Thanks in advance
>> Lars
>>
>>
>> _______________________________________________
>> ffmpeg-user mailing list
>> [hidden email]
>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>>
>> To unsubscribe, visit link above, or email
>> [hidden email] with subject "unsubscribe".
>
>
>
> --
> William McCall
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".

_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Carl Zwanzig
On 3/2/2018 9:17 AM, Lars von Gehr wrote:
> ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers

Try a *much* newer version of ffmpeg.

z!
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Lars von Gehr
Hi Carl,
You are right, the seems to be little bit older. ffmpeg is running on a Synology DS and this version is the newest available for this system. But maybe  this is the problem.

Regards
Lars

> Am 02.03.2018 um 18:20 schrieb Carl Zwanzig <[hidden email]>:
>
> On 3/2/2018 9:17 AM, Lars von Gehr wrote:
>> ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
>
> Try a *much* newer version of ffmpeg.
>
> z!
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".

_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Carl Zwanzig
On 3/2/2018 9:41 AM, Lars von Gehr wrote:
> ffmpeg is running on a Synology DS and this version is the newest
> available for this system. But maybe this is the problem.
I don't know synology, but you may find a newer version on online somewhere.
(Can you manually build for that system?)

Oh, and please don't top-post on this list.

Later,

z!
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Marcin W.
Put rtsp path into quotes.

02.03.2018 18:43 "Carl Zwanzig" <[hidden email]> napisał(a):

> On 3/2/2018 9:41 AM, Lars von Gehr wrote:
>
>> ffmpeg is running on a Synology DS and this version is the newest
>> available for this system. But maybe this is the problem.
>>
> I don't know synology, but you may find a newer version on online
> somewhere. (Can you manually build for that system?)
>
> Oh, and please don't top-post on this list.
>
> Later,
>
> z!
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Lars von Gehr
In reply to this post by Lars von Gehr
Hi,
I tried your ideas. Got the newest version of ffmpeg on Mac and used quotes. This seems to be the right way, it´s running better, but now I got new errors, I have no idea to solve.
First on is a invalid frame dimensions 0x0 and second no such file or directory.
Any ideas?

:~ Lars$ ffmpeg -i "rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214" -t 30 -acodec copy -vcodec copy /downloads/test1.ts
ffmpeg version 3.4.2 Copyright (c) 2000-2018 the FFmpeg developers
  built with Apple LLVM version 9.0.0 (clang-900.0.39.2)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/3.4.2 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --disable-jack --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-opencl --enable-videotoolbox --disable-lzma
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
[mpeg2video @ 0x7fec3a800600] Invalid frame dimensions 0x0.
    Last message repeated 1 times
Input #0, rtsp, from 'rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214':
  Metadata:
    title           : SatIPServer:1 2
  Duration: N/A, start: 53275.992456, bitrate: N/A
  Program 2
    Metadata:
      service_name    : Eurosport
      service_provider: DEUTSCH
  Program 7
    Metadata:
      service_name    : SHOW RADYO
      service_provider: Radio
  Program 160
    Metadata:
      service_name    : ROCK ANTENNE
      service_provider: Radio
  Program 6510
    Metadata:
      service_name    : ?sixx
      service_provider: DEUTSCH
  Program 12602
    Metadata:
      service_name    : DMAX
      service_provider: DEUTSCH
    Stream #0:0: Video: mpeg2video (Main), yuv420p(tv, top first), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:2(deu): Audio: mp2, 48000 Hz, stereo, s16p, 192 kb/s (clean effects)
    Stream #0:1(deu): Subtitle: dvb_teletext ([6][0][0][0] / 0x0006)
  Program 12655
    Metadata:
      service_name    : Radio Paloma
      service_provider: Radio
  Program 28308
    Metadata:
      service_name    : ?WDR D?sseldorf
      service_provider: DEUTSCH
  Program 28325
    Metadata:
      service_name    : ?WDR HD K?ln
      service_provider: DEUTSCH
  Program 28534
    Metadata:
      service_name    : WDR Aachen
      service_provider: DEUTSCH
  Program 28535
    Metadata:
      service_name    : WDR Wuppertal
      service_provider: DEUTSCH
  Program 28536
    Metadata:
      service_name    : WDR Bonn
      service_provider: DEUTSCH
  Program 51103
    Metadata:
      service_name    : GOD TV
      service_provider: INTERNATIONAL
/downloads/test1.ts: No such file or directory
:~ Lars$


_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

Marcin Woźniak
W dniu 03.03.2018 o 14:21, Lars von Gehr pisze:
> Hi,
> I tried your ideas. Got the newest version of ffmpeg on Mac and used quotes. This seems to be the right way, it´s running better, but now I got new errors, I have no idea to solve.
> First on is a invalid frame dimensions 0x0 and second no such file or directory.
> Any ideas?
Check permision to /downlods/ directory.

>
> :~ Lars$ ffmpeg -i "rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214" -t 30 -acodec copy -vcodec copy /downloads/test1.ts
> ffmpeg version 3.4.2 Copyright (c) 2000-2018 the FFmpeg developers
>    built with Apple LLVM version 9.0.0 (clang-900.0.39.2)
>    configuration: --prefix=/usr/local/Cellar/ffmpeg/3.4.2 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --disable-jack --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-opencl --enable-videotoolbox --disable-lzma
>    libavutil      55. 78.100 / 55. 78.100
>    libavcodec     57.107.100 / 57.107.100
>    libavformat    57. 83.100 / 57. 83.100
>    libavdevice    57. 10.100 / 57. 10.100
>    libavfilter     6.107.100 /  6.107.100
>    libavresample   3.  7.  0 /  3.  7.  0
>    libswscale      4.  8.100 /  4.  8.100
>    libswresample   2.  9.100 /  2.  9.100
>    libpostproc    54.  7.100 / 54.  7.100
> [mpeg2video @ 0x7fec3a800600] Invalid frame dimensions 0x0.
>      Last message repeated 1 times
> Input #0, rtsp, from 'rtsp://192.168.178.254:554/?freq=322&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,6208,6209,6212,6214':
>    Metadata:
>      title           : SatIPServer:1 2
>    Duration: N/A, start: 53275.992456, bitrate: N/A
>    Program 2
>      Metadata:
>        service_name    : Eurosport
>        service_provider: DEUTSCH
>    Program 7
>      Metadata:
>        service_name    : SHOW RADYO
>        service_provider: Radio
>    Program 160
>      Metadata:
>        service_name    : ROCK ANTENNE
>        service_provider: Radio
>    Program 6510
>      Metadata:
>        service_name    : ?sixx
>        service_provider: DEUTSCH
>    Program 12602
>      Metadata:
>        service_name    : DMAX
>        service_provider: DEUTSCH
>      Stream #0:0: Video: mpeg2video (Main), yuv420p(tv, top first), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
>      Stream #0:2(deu): Audio: mp2, 48000 Hz, stereo, s16p, 192 kb/s (clean effects)
>      Stream #0:1(deu): Subtitle: dvb_teletext ([6][0][0][0] / 0x0006)
>    Program 12655
>      Metadata:
>        service_name    : Radio Paloma
>        service_provider: Radio
>    Program 28308
>      Metadata:
>        service_name    : ?WDR D?sseldorf
>        service_provider: DEUTSCH
>    Program 28325
>      Metadata:
>        service_name    : ?WDR HD K?ln
>        service_provider: DEUTSCH
>    Program 28534
>      Metadata:
>        service_name    : WDR Aachen
>        service_provider: DEUTSCH
>    Program 28535
>      Metadata:
>        service_name    : WDR Wuppertal
>        service_provider: DEUTSCH
>    Program 28536
>      Metadata:
>        service_name    : WDR Bonn
>        service_provider: DEUTSCH
>    Program 51103
>      Metadata:
>        service_name    : GOD TV
>        service_provider: INTERNATIONAL
> /downloads/test1.ts: No such file or directory
> :~ Lars$
>
>
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".

_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".

marcin_wozniak.vcf (300 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: saving rtsp stream

桃源老師-2
In reply to this post by Lars von Gehr
Hi,

> 2018/03/03 午後10:21、Lars von Gehr <[hidden email]>のメール:
>
> /downloads/test1.ts: No such file or directory

Assuming you are on the macOS...

Does your download directory is placed under "/" (Slash)?
On macOS, slash means start up disk directory.  Might not be placed download directory on there...

Also, download directory on normal User home directory starts with "D". Downloads.

Note that command line is case sensitive...


Best Regards,


// Miya aka. TougenRoushi


_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".

smime.p7s (5K) Download Attachment