DeckLink Mini Monitor 4K

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

DeckLink Mini Monitor 4K

Mustafa Al Ani
Hi,

In my setup I have two decklink cards, 'DeckLink SDI Micro' and 'DeckLink
Mini Monitor 4K'

I'm trying to get "DeckLink Mini Monitor 4K" to work with ffmpeg but it
doesn't seem to be detected by ffmpeg.

When I run "ffmpeg -f decklink -list_devices 1 -i dummy" I can only see the
micro card!

ffmpeg -f decklink -list_devices 1 -i dummy
ffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10) 20160609
  configuration: --enable-libndi_newtek
--extra-cflags='-I/home/iohub/ffmpeg/ndi/include
-I/home/iohub/ffmpeg/decklink/Linux/include'
--extra-ldflags=-L/home/iohub/ffmpeg/ndi/lib/x86_64-linux-gnu
--enable-libsrt --enable-decklink --enable-libx264 --enable-ffplay
--enable-nonfree --enable-gpl --enable-libfdk-aac --enable-libx265
  libavutil      56. 14.100 / 56. 14.100
  libavcodec     58. 18.100 / 58. 18.100
  libavformat    58. 12.100 / 58. 12.100
  libavdevice    58.  3.100 / 58.  3.100
  libavfilter     7. 16.100 /  7. 16.100
  libswscale      5.  1.100 /  5.  1.100
  libswresample   3.  1.100 /  3.  1.100
  libpostproc    55.  1.100 / 55.  1.100
[decklink @ 0x3566c80] Blackmagic DeckLink input devices:
[decklink @ 0x3566c80]  'DeckLink SDI Micro'
dummy: Immediate exit requested


I have removed the driver and installed it again, removed the sdk and
installed it again and even compiled ffmpeg again but it still not detected.

Decklink SDK can see both cards .. here is the output of ./DeviceList

=============== DeckLink SDI Micro ===============

Attribute list:
 Serial port present ?                    No
 Device Persistent ID:                    302117a0
 Device Topological ID:                   5c0100
 Number of sub-devices:                   1
 Sub-device index:                        0
 Number of audio channels:                16
 Input mode detection supported ?         Yes
 Full duplex operation supported ?        Yes
 Internal keying supported ?              No
 External keying supported ?              No
 HD-mode keying supported ?               No

=============== DeckLink Mini Monitor 4K ===============

Attribute list:
 Serial port present ?                    No
 Device Persistent ID:                    e0e10bb
 Device Topological ID:                   530600
 Number of sub-devices:                   1
 Sub-device index:                        0
 Number of audio channels:                16
 Input mode detection supported ?         No
 Full duplex operation supported ?        No
 Internal keying supported ?              No
 External keying supported ?              No
 HD-mode keying supported ?               No


Your inputs are highly appreciated.
Regards,
Mustafa
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: DeckLink Mini Monitor 4K

Marton Balint


On Sat, 4 Aug 2018, Mustafa Al Ani wrote:

> Hi,
>
> In my setup I have two decklink cards, 'DeckLink SDI Micro' and 'DeckLink
> Mini Monitor 4K'
>
> I'm trying to get "DeckLink Mini Monitor 4K" to work with ffmpeg but it
> doesn't seem to be detected by ffmpeg.
>
> When I run "ffmpeg -f decklink -list_devices 1 -i dummy" I can only see the
> micro card!
>
> ffmpeg -f decklink -list_devices 1 -i dummy
> ffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developers
>  built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10) 20160609
>  configuration: --enable-libndi_newtek
> --extra-cflags='-I/home/iohub/ffmpeg/ndi/include
> -I/home/iohub/ffmpeg/decklink/Linux/include'
> --extra-ldflags=-L/home/iohub/ffmpeg/ndi/lib/x86_64-linux-gnu
> --enable-libsrt --enable-decklink --enable-libx264 --enable-ffplay
> --enable-nonfree --enable-gpl --enable-libfdk-aac --enable-libx265
>  libavutil      56. 14.100 / 56. 14.100
>  libavcodec     58. 18.100 / 58. 18.100
>  libavformat    58. 12.100 / 58. 12.100
>  libavdevice    58.  3.100 / 58.  3.100
>  libavfilter     7. 16.100 /  7. 16.100
>  libswscale      5.  1.100 /  5.  1.100
>  libswresample   3.  1.100 /  3.  1.100
>  libpostproc    55.  1.100 / 55.  1.100
> [decklink @ 0x3566c80] Blackmagic DeckLink input devices:
> [decklink @ 0x3566c80]  'DeckLink SDI Micro'
> dummy: Immediate exit requested

Mini Monitor is an output only card, and you are listing the input
devices. For output devices you should do something like:

ffmpeg -i test.avi -f decklink -list_devices 1 dummy

The manual gives this example as well.

Regards,
Marton
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: DeckLink Mini Monitor 4K

Mustafa Al Ani
Ahh! how didn't I see that.!!

Thank you so much Marton.

R,
Mustafa



On Sat, Aug 4, 2018 at 5:44 PM Marton Balint <[hidden email]> wrote:

>
>
> On Sat, 4 Aug 2018, Mustafa Al Ani wrote:
>
> > Hi,
> >
> > In my setup I have two decklink cards, 'DeckLink SDI Micro' and 'DeckLink
> > Mini Monitor 4K'
> >
> > I'm trying to get "DeckLink Mini Monitor 4K" to work with ffmpeg but it
> > doesn't seem to be detected by ffmpeg.
> >
> > When I run "ffmpeg -f decklink -list_devices 1 -i dummy" I can only see
> the
> > micro card!
> >
> > ffmpeg -f decklink -list_devices 1 -i dummy
> > ffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developers
> >  built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10) 20160609
> >  configuration: --enable-libndi_newtek
> > --extra-cflags='-I/home/iohub/ffmpeg/ndi/include
> > -I/home/iohub/ffmpeg/decklink/Linux/include'
> > --extra-ldflags=-L/home/iohub/ffmpeg/ndi/lib/x86_64-linux-gnu
> > --enable-libsrt --enable-decklink --enable-libx264 --enable-ffplay
> > --enable-nonfree --enable-gpl --enable-libfdk-aac --enable-libx265
> >  libavutil      56. 14.100 / 56. 14.100
> >  libavcodec     58. 18.100 / 58. 18.100
> >  libavformat    58. 12.100 / 58. 12.100
> >  libavdevice    58.  3.100 / 58.  3.100
> >  libavfilter     7. 16.100 /  7. 16.100
> >  libswscale      5.  1.100 /  5.  1.100
> >  libswresample   3.  1.100 /  3.  1.100
> >  libpostproc    55.  1.100 / 55.  1.100
> > [decklink @ 0x3566c80] Blackmagic DeckLink input devices:
> > [decklink @ 0x3566c80]  'DeckLink SDI Micro'
> > dummy: Immediate exit requested
>
> Mini Monitor is an output only card, and you are listing the input
> devices. For output devices you should do something like:
>
> ffmpeg -i test.avi -f decklink -list_devices 1 dummy
>
> The manual gives this example as well.
>
> Regards,
> Marton
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".