453 Not enough bandwidth error

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

453 Not enough bandwidth error

Michael Shaffer
Hi, I'm trying to stream an IP camera to youtube, using FFMPEG to push the
stream. The problem is, if I put the camera in 1080p mode, I get this error:

method SETUP failed: 453 Not Enough Bandwidth
Server returned 4XX Client Error, but not one of 40{0,1,3,4}

It works fine in 720p mode but not 1080p. It seems to be just this camera
model (Sanyo VCC-HD4000) since I have 3 other cameras that work fine on
1080p.

I read a review on this camera and they said it uses a lot of bandwidth
compared to other cameras. On 720p mode it's using about 5000kbps, which
most of my other cameras use on 1080p mode.

Anyways, is there a way to allow FFMPEG to use more bandwidth? I have some
programming experience, could I edit the FFMPEG code somehow to allow more
bandwidth?

Thanks,

Michael Shaffer
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: 453 Not enough bandwidth error

Moritz Barsnick
Hi Michael,

On Mon, Jul 09, 2018 at 16:39:32 -0400, Michael Shaffer wrote:
> Hi, I'm trying to stream an IP camera to youtube, using FFMPEG to push the
> stream. The problem is, if I put the camera in 1080p mode, I get this error:
>
> method SETUP failed: 453 Not Enough Bandwidth
> Server returned 4XX Client Error, but not one of 40{0,1,3,4}

Could you please show us the actual ffmpeg command line and its
complete, uncut console output?

> Anyways, is there a way to allow FFMPEG to use more bandwidth? I have some
> programming experience, could I edit the FFMPEG code somehow to allow more
> bandwidth?

That error message isn't caused by ffmpeg. ffmpeg can handle plenty of
bandwidth (assuming enough CPU and I/O), the RTMP server you're sending
to probably can't. We'll see when we see the output requested above.

Cheers,
Moritz
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: 453 Not enough bandwidth error

Michael Shaffer
Here is the command, with a screen shot of it and the error.

c:\ffmpeg\bin\ffmpeg3.exe -re -rtsp_transport tcp -i "rtsp://
admin:admin@192.168.1.230:554/VideoInput/1/h264/1" -f lavfi -f dshow
-rtbufsize 2000M -thread_queue_size 5096 -i audio="virtual-audio-capturer"
-c:a libmp3lame -ab 128k -ar 44100 -c:v copy -threads 0 -bufsize 512k -f
flv "rtmp://a.rtmp.youtube.com/live2/7ddp-1234-5678-f3ff"

Screenshot:
https://kdca.neocities.org/command.jpg


On Tue, Jul 10, 2018 at 5:36 AM, Moritz Barsnick <[hidden email]> wrote:

> Hi Michael,
>
> On Mon, Jul 09, 2018 at 16:39:32 -0400, Michael Shaffer wrote:
> > Hi, I'm trying to stream an IP camera to youtube, using FFMPEG to push
> the
> > stream. The problem is, if I put the camera in 1080p mode, I get this
> error:
> >
> > method SETUP failed: 453 Not Enough Bandwidth
> > Server returned 4XX Client Error, but not one of 40{0,1,3,4}
>
> Could you please show us the actual ffmpeg command line and its
> complete, uncut console output?
>
> > Anyways, is there a way to allow FFMPEG to use more bandwidth? I have
> some
> > programming experience, could I edit the FFMPEG code somehow to allow
> more
> > bandwidth?
>
> That error message isn't caused by ffmpeg. ffmpeg can handle plenty of
> bandwidth (assuming enough CPU and I/O), the RTMP server you're sending
> to probably can't. We'll see when we see the output requested above.
>
> Cheers,
> Moritz
> _______________________________________________
> ffmpeg-user mailing list
> [hidden email]
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
> To unsubscribe, visit link above, or email
> [hidden email] with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: 453 Not enough bandwidth error

Michael Shaffer
It plays fine in VLC player at 1080p, but FFMPEG won't work. I've googled
this problem and only found one or two topics.

This is the stream I'm trying to get in to 1080p mode
https://www.youtube.com/watch?v=jYzQWfIBXQo
It's getting a lot of viewers, I wish I could get it to work in the higher
resoltuion.

On Thu, Jul 12, 2018 at 7:26 AM, Michael Shaffer <[hidden email]>
wrote:

> Here is the command, with a screen shot of it and the error.
>
> c:\ffmpeg\bin\ffmpeg3.exe -re -rtsp_transport tcp -i "rtsp://
> admin:admin@192.168.1.230:554/VideoInput/1/h264/1" -f lavfi -f dshow
> -rtbufsize 2000M -thread_queue_size 5096 -i audio="virtual-audio-capturer"
> -c:a libmp3lame -ab 128k -ar 44100 -c:v copy -threads 0 -bufsize 512k -f
> flv "rtmp://a.rtmp.youtube.com/live2/7ddp-1234-5678-f3ff"
>
> Screenshot:
> https://kdca.neocities.org/command.jpg
>
>
> On Tue, Jul 10, 2018 at 5:36 AM, Moritz Barsnick <[hidden email]> wrote:
>
>> Hi Michael,
>>
>> On Mon, Jul 09, 2018 at 16:39:32 -0400, Michael Shaffer wrote:
>> > Hi, I'm trying to stream an IP camera to youtube, using FFMPEG to push
>> the
>> > stream. The problem is, if I put the camera in 1080p mode, I get this
>> error:
>> >
>> > method SETUP failed: 453 Not Enough Bandwidth
>> > Server returned 4XX Client Error, but not one of 40{0,1,3,4}
>>
>> Could you please show us the actual ffmpeg command line and its
>> complete, uncut console output?
>>
>> > Anyways, is there a way to allow FFMPEG to use more bandwidth? I have
>> some
>> > programming experience, could I edit the FFMPEG code somehow to allow
>> more
>> > bandwidth?
>>
>> That error message isn't caused by ffmpeg. ffmpeg can handle plenty of
>> bandwidth (assuming enough CPU and I/O), the RTMP server you're sending
>> to probably can't. We'll see when we see the output requested above.
>>
>> Cheers,
>> Moritz
>> _______________________________________________
>> ffmpeg-user mailing list
>> [hidden email]
>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>>
>> To unsubscribe, visit link above, or email
>> [hidden email] with subject "unsubscribe".
>
>
>
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".
Reply | Threaded
Open this post in threaded view
|

Re: 453 Not enough bandwidth error

Michael Shaffer
I guess it could be youtube that is the problem. I'll try finding another
streaming service and see if it works there.

On Fri, Jul 13, 2018 at 3:49 PM, Michael Shaffer <[hidden email]>
wrote:

> It plays fine in VLC player at 1080p, but FFMPEG won't work. I've googled
> this problem and only found one or two topics.
>
> This is the stream I'm trying to get in to 1080p mode
> https://www.youtube.com/watch?v=jYzQWfIBXQo
> It's getting a lot of viewers, I wish I could get it to work in the higher
> resoltuion.
>
> On Thu, Jul 12, 2018 at 7:26 AM, Michael Shaffer <[hidden email]>
> wrote:
>
>> Here is the command, with a screen shot of it and the error.
>>
>> c:\ffmpeg\bin\ffmpeg3.exe -re -rtsp_transport tcp -i "rtsp://
>> admin:admin@192.168.1.230:554/VideoInput/1/h264/1" -f lavfi -f dshow
>> -rtbufsize 2000M -thread_queue_size 5096 -i audio="virtual-audio-capturer"
>> -c:a libmp3lame -ab 128k -ar 44100 -c:v copy -threads 0 -bufsize 512k -f
>> flv "rtmp://a.rtmp.youtube.com/live2/7ddp-1234-5678-f3ff"
>>
>> Screenshot:
>> https://kdca.neocities.org/command.jpg
>>
>>
>> On Tue, Jul 10, 2018 at 5:36 AM, Moritz Barsnick <[hidden email]>
>> wrote:
>>
>>> Hi Michael,
>>>
>>> On Mon, Jul 09, 2018 at 16:39:32 -0400, Michael Shaffer wrote:
>>> > Hi, I'm trying to stream an IP camera to youtube, using FFMPEG to push
>>> the
>>> > stream. The problem is, if I put the camera in 1080p mode, I get this
>>> error:
>>> >
>>> > method SETUP failed: 453 Not Enough Bandwidth
>>> > Server returned 4XX Client Error, but not one of 40{0,1,3,4}
>>>
>>> Could you please show us the actual ffmpeg command line and its
>>> complete, uncut console output?
>>>
>>> > Anyways, is there a way to allow FFMPEG to use more bandwidth? I have
>>> some
>>> > programming experience, could I edit the FFMPEG code somehow to allow
>>> more
>>> > bandwidth?
>>>
>>> That error message isn't caused by ffmpeg. ffmpeg can handle plenty of
>>> bandwidth (assuming enough CPU and I/O), the RTMP server you're sending
>>> to probably can't. We'll see when we see the output requested above.
>>>
>>> Cheers,
>>> Moritz
>>> _______________________________________________
>>> ffmpeg-user mailing list
>>> [hidden email]
>>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>>>
>>> To unsubscribe, visit link above, or email
>>> [hidden email] with subject "unsubscribe".
>>
>>
>>
>
_______________________________________________
ffmpeg-user mailing list
[hidden email]
http://ffmpeg.org/mailman/listinfo/ffmpeg-user

To unsubscribe, visit link above, or email
[hidden email] with subject "unsubscribe".